By Leonie Scherer at February 12 2019 00:57:45
It is also a good idea to keep a list of things that you don't like; things you may have seen in a magazine or noted when visiting other log homes. Some of the most frequent complaints one hears about log homes, especially older models, is the lack of storage space and small closets or bathrooms. This is most often the result of poor planning or not taking into consideration the diameter of log walls and the lack of attics in most log homes. Refer to your list when discussing details with your designer and remember that in most cases you cannot build a closet or a bathroom that is too large.
Now it is time to play with placing furnishings in the floor plan. When the basic room plan is completed make a few copies and have fun designing the room for several scenarios as if playing with furniture in a dollhouse. Just as room was scaled to fit the floor plan the furniture must be placed in the room to scale as well.
Other differences _ Let's read about some other things that differentiate 2D designs from 3D designs. Affordability _ As far as cost goes, 2D plans are cheap. But if you are after quality, we suggest that you spend a bit more and go for 3D floor plans.
Draw a scaled plan using a pencil and graph paper. Now that the measurements have been taken it is time to get to work to create a scaled plan of the room. Drawing a room to scale on plan is simple once one understands that one quarter inch square on the graph paper equals one foot, and that inches can be estimated with half a square equaling 6_inches and a fourth of a square equating to 3_inches. Using the length and width measurements draw the basic room perimeter to scale onto the graph paper with a pencil. Draw in the doors, windows, etc. to scale on the graph paper in the same way you measured them in the room.