By Dennis Mayer at April 23 2019 12:47:22
By and large, almost any residential floor plan can be adapted to a log home, but there are substantial differences and considerations that need to be addressed. One such example is that of room dimensions as they relate to the diameter of the logs you will be utilizing. A custom handcrafted home made from 20" diameter logs will have a different footprint than one requiring 6" milled logs. If this is the first time you will be dealing with a log home manufacturer or architect, make sure you are comparing 'apples to apples' when discussing interior dimensions. If you want a room to be 14' wide, make certain that your designer knows that you want the interior of the room to have 14' of open clearance and not measured from the center of the corresponding logs. Using the example above, your 14' room could shrink to 12' if such presumptions are not understood.
During these same discussions ask questions like the cost difference to build a single level home as compared to a multi_level home. This is valuable information even if you are planning on a single level as your only option. The reason is that multi_level house floor plans costs are less per square foot and you may get more bang for your buck that way.
Other differences _ Let's read about some other things that differentiate 2D designs from 3D designs. Affordability _ As far as cost goes, 2D plans are cheap. But if you are after quality, we suggest that you spend a bit more and go for 3D floor plans.
We are going to assume here that you have already looked into your financing options and have a good idea of the amount of your budget you can apply towards the actual building cost of your new home. Begin with this amount and deduct 10% right off the top. You will thank me for this advice in the end. Everyone goes over budget during construction, even the financial nerds can't control every little detail that comes along. Take this net building budget and divide this dollar amount by the average square foot cost to build you got from the realtor or builder. Since I hope they gave you a low and high range this will give you two new numbers. These numbers are the low to high total square footage house floor plans sizes you should be searching for. If you choose to look at multi_level house floor plans then you will be comfortable on the upper level of this number since your cost per foot will be lower.