By Leonie Scherer at February 10 2019 23:19:45
Draw a scaled plan using a pencil and graph paper. Now that the measurements have been taken it is time to get to work to create a scaled plan of the room. Drawing a room to scale on plan is simple once one understands that one quarter inch square on the graph paper equals one foot, and that inches can be estimated with half a square equaling 6_inches and a fourth of a square equating to 3_inches. Using the length and width measurements draw the basic room perimeter to scale onto the graph paper with a pencil. Draw in the doors, windows, etc. to scale on the graph paper in the same way you measured them in the room.
When considering the floor plan the first thing to do is consider the menu. The menu and the type of food that is being created actually decides the lay out of the kitchen. The first thing to do is consider the flow of traffic for food preparation. Then the flow in and out of the kitchen needs to be considered. This is even more important than the actual table layout of the restaurant itself. A mistake here could end up costing money to repair as well as lowering the available profit margin.
A 'CAD set' helps one make extensive changes to the plan with the help of a design expert. It is comparable to the reproducible set, except it is in an electronic format. A 'study set' helps one ascertain if his home can be built within budget. The floor plans in this set include a view of the outside from all four sides, plus the main story and any additional stories. 'Single set' is for finding contractor bids, and this set of house floor plans does not incorporate a building license.
There are a lot of advantages of floor plans. For instance, they offer beautiful designs and the right dimensions for your desired designs. As a matter of fact, these floor plans are colorful and show beautiful pictorial illustrations. You can create these plans in many formats, such as DWG, TIF, WMF, and JPEG, just to name a few. Moreover, you can make them in either 3D or 2D based on your desired results. Hand drawn sketches are easy to convert into both 2D and 3D format. If you want to know the difference between 2D and 3D floor plans, you may want to read on.