By Ursula Kuefer at March 11 2019 00:54:08
Functionality of space _ if there is an elderly person or invalid at home with requirement for extra space or young children who need more space around the house, these requirements should be factored in. Making provision for family changes while drawing up floor plans is advantageous even if the requirement is not immediate as future alterations and additions may not be possible always.
Begin with measuring. Do a very rough drawing, on a piece of scrap paper for measuring purposes only, of your room showing walls and openings for doors, windows and fireplaces. Note where columns and built_in cabinetry are in the room as well. Take out the measuring tape and begin measuring a room writing down each measurement in the applicable space on your rough drawing. For a basic start, measure the length and width of your room.
It is also a good idea to keep a list of things that you don't like; things you may have seen in a magazine or noted when visiting other log homes. Some of the most frequent complaints one hears about log homes, especially older models, is the lack of storage space and small closets or bathrooms. This is most often the result of poor planning or not taking into consideration the diameter of log walls and the lack of attics in most log homes. Refer to your list when discussing details with your designer and remember that in most cases you cannot build a closet or a bathroom that is too large.
Got land? Before you spend too much time browsing floor plan possibilities, you need to know where that home will be built. Not all floor plan designs are suited for all building sites. For instance, a walk_out basement typically requires a home being built on a slope or recessed into a hillside. Additionally, some plans are designed to take advantage of the home's location relative to sunlight so even if you already own your land, you will want to know where and how your home will be positioned on your property. Once you have an idea of where those logs will be stacked it's time to figure out what that stack needs to look like.