By Florian Nadel at March 04 2019 15:09:49
Begin with measuring. Do a very rough drawing, on a piece of scrap paper for measuring purposes only, of your room showing walls and openings for doors, windows and fireplaces. Note where columns and built_in cabinetry are in the room as well. Take out the measuring tape and begin measuring a room writing down each measurement in the applicable space on your rough drawing. For a basic start, measure the length and width of your room.
Draw a scaled plan using a pencil and graph paper. Now that the measurements have been taken it is time to get to work to create a scaled plan of the room. Drawing a room to scale on plan is simple once one understands that one quarter inch square on the graph paper equals one foot, and that inches can be estimated with half a square equaling 6_inches and a fourth of a square equating to 3_inches. Using the length and width measurements draw the basic room perimeter to scale onto the graph paper with a pencil. Draw in the doors, windows, etc. to scale on the graph paper in the same way you measured them in the room.
The façade is brick or wooden, with large windows. Ranch homes typically have an L_shaped hall which combines the living room and dining room into one area, with a hallway leading to the family room and a group of bedrooms all on one side of the house. A patio at the back with a glass sliding door leading to it is not unusual for a ranch house.
If the floor plans are being made by a specialist such as an architect or engineer, the homeowner has the advantage of experience and expertise on his side. However, no one knows the needs of a home better than the homeowner and a customized design can be put together by the individual concerned.