By Niklas Finkel at May 14 2019 18:26:50
We are going to assume here that you have already looked into your financing options and have a good idea of the amount of your budget you can apply towards the actual building cost of your new home. Begin with this amount and deduct 10% right off the top. You will thank me for this advice in the end. Everyone goes over budget during construction, even the financial nerds can't control every little detail that comes along. Take this net building budget and divide this dollar amount by the average square foot cost to build you got from the realtor or builder. Since I hope they gave you a low and high range this will give you two new numbers. These numbers are the low to high total square footage house floor plans sizes you should be searching for. If you choose to look at multi_level house floor plans then you will be comfortable on the upper level of this number since your cost per foot will be lower.
One should work their way around the room and get into a measuring rhythm. Beginning at one corner, measure from one corner to inside the door or window frame. Then measure the door or window width. Now measure from the other side of the door or window along the wall to the next door or window. Measure the width of the door or window. Continue measuring until the measurements on each or the room's wall have been completely transcribed to the rough drawing. Measure column widths and where they are exactly placed in the room by measuring from perpendicular walls to the column.