By Michael Schmid at February 26 2019 07:28:36
Why use 3D rendering? If you are looking to build a home or you have a development project, 3D rendering is such a great tool. It gives you the opportunity to see the project before you even start to build! From the facades, right down to the light fixtures. This allows you to ensure that you get everything you want and need out of your new design. This technology has completely changed the dynamics of architecture and engineering as it gives you the ability to see exactly what the home or development will look like before you even start to build. If you are looking to build in Sydney or anywhere in Australia then 3D rendering will give you the freedom to design it and then build it!
One should work their way around the room and get into a measuring rhythm. Beginning at one corner, measure from one corner to inside the door or window frame. Then measure the door or window width. Now measure from the other side of the door or window along the wall to the next door or window. Measure the width of the door or window. Continue measuring until the measurements on each or the room's wall have been completely transcribed to the rough drawing. Measure column widths and where they are exactly placed in the room by measuring from perpendicular walls to the column.
Functionality of space _ if there is an elderly person or invalid at home with requirement for extra space or young children who need more space around the house, these requirements should be factored in. Making provision for family changes while drawing up floor plans is advantageous even if the requirement is not immediate as future alterations and additions may not be possible always.
Begin with measuring. Do a very rough drawing, on a piece of scrap paper for measuring purposes only, of your room showing walls and openings for doors, windows and fireplaces. Note where columns and built_in cabinetry are in the room as well. Take out the measuring tape and begin measuring a room writing down each measurement in the applicable space on your rough drawing. For a basic start, measure the length and width of your room.