By Niklas Finkel at May 18 2019 11:49:30
It is also a good idea to keep a list of things that you don't like; things you may have seen in a magazine or noted when visiting other log homes. Some of the most frequent complaints one hears about log homes, especially older models, is the lack of storage space and small closets or bathrooms. This is most often the result of poor planning or not taking into consideration the diameter of log walls and the lack of attics in most log homes. Refer to your list when discussing details with your designer and remember that in most cases you cannot build a closet or a bathroom that is too large.
One should work their way around the room and get into a measuring rhythm. Beginning at one corner, measure from one corner to inside the door or window frame. Then measure the door or window width. Now measure from the other side of the door or window along the wall to the next door or window. Measure the width of the door or window. Continue measuring until the measurements on each or the room's wall have been completely transcribed to the rough drawing. Measure column widths and where they are exactly placed in the room by measuring from perpendicular walls to the column.
The ranch house floor plan is a shining example of the American Dream in its purest form. It was then, and remains today, the most widely built housing style ever seen in America. This house plan style had its heyday from 1949 to 1965 for several reasons.
Technical difference _ In 2D floor plans, you, the designer, work on both y axis and x axis. Moreover, the design can be changed in up, down, right and left sides. On the other hand, 2D plans are a lot simpler and cheaper relatively. They can be used to show the right, top and front side of the object. Unlike 2D, designers work on three exis to create 3D floor plans. Actually, this is like molding an object that looks same no matter which angle you look at it from. With 3D technology, solid models and wireframes are created line by line.