By Niklas Finkel at April 19 2019 09:06:30
A poorly laid out floor plan can create serious issues with financing if extra money has to be borrowed or things have to be corrected later. The next step is to consider the floor plan of the service centers, if there are any. These should be set near to where the customers are going to be while still being out of the way. You may also want to consider the fact that they may need to be near the kitchen.
Setting a proper floor plan is essential to being able to maximize future profits and minimize losses. Everything from the kitchen to the front door needs to be planned out and laid out in order to ensure that the restaurant follows a flow pattern that is going to allow the kitchen to run smoothly during food preparation and cooking as well as the flow in and out of the kitchen. Setting these aspects are going to be the largest drain on finances for any new restaurant.
Other differences _ Let's read about some other things that differentiate 2D designs from 3D designs. Affordability _ As far as cost goes, 2D plans are cheap. But if you are after quality, we suggest that you spend a bit more and go for 3D floor plans.
One should work their way around the room and get into a measuring rhythm. Beginning at one corner, measure from one corner to inside the door or window frame. Then measure the door or window width. Now measure from the other side of the door or window along the wall to the next door or window. Measure the width of the door or window. Continue measuring until the measurements on each or the room's wall have been completely transcribed to the rough drawing. Measure column widths and where they are exactly placed in the room by measuring from perpendicular walls to the column.