By Niklas Finkel at March 25 2019 15:47:20
These are just a few ideas that can help you choose and refine a floor plan to fit your lifestyle and accommodate your family's needs. Your log home company or architect will have many ideas that you may not have considered so encourage them to offer suggestions. Explain what you are trying to achieve and let their experience and knowledge guide you, but in the end, this is your floor plan.
By and large, almost any residential floor plan can be adapted to a log home, but there are substantial differences and considerations that need to be addressed. One such example is that of room dimensions as they relate to the diameter of the logs you will be utilizing. A custom handcrafted home made from 20" diameter logs will have a different footprint than one requiring 6" milled logs. If this is the first time you will be dealing with a log home manufacturer or architect, make sure you are comparing 'apples to apples' when discussing interior dimensions. If you want a room to be 14' wide, make certain that your designer knows that you want the interior of the room to have 14' of open clearance and not measured from the center of the corresponding logs. Using the example above, your 14' room could shrink to 12' if such presumptions are not understood.
One can safely assume that many pre_drawn house floor plans have already been tried and tested. That means construction hassles would have already been sorted out, which implies that any additional labor costs and uncertainties during the construction phase will not exist.
One should work their way around the room and get into a measuring rhythm. Beginning at one corner, measure from one corner to inside the door or window frame. Then measure the door or window width. Now measure from the other side of the door or window along the wall to the next door or window. Measure the width of the door or window. Continue measuring until the measurements on each or the room's wall have been completely transcribed to the rough drawing. Measure column widths and where they are exactly placed in the room by measuring from perpendicular walls to the column.