By Leonie Scherer at March 02 2019 16:17:45
Begin with measuring. Do a very rough drawing, on a piece of scrap paper for measuring purposes only, of your room showing walls and openings for doors, windows and fireplaces. Note where columns and built_in cabinetry are in the room as well. Take out the measuring tape and begin measuring a room writing down each measurement in the applicable space on your rough drawing. For a basic start, measure the length and width of your room.
The façade is brick or wooden, with large windows. Ranch homes typically have an L_shaped hall which combines the living room and dining room into one area, with a hallway leading to the family room and a group of bedrooms all on one side of the house. A patio at the back with a glass sliding door leading to it is not unusual for a ranch house.
Be aware that room is needed to walk around pieces or to pull out chairs; three feet is optimum but thirty_inches will work. Make sure that there is room for a door to open and that windows are not blocked. Shop online for sofas, tables and bedroom set ideas; find the measurements of the pieces desired and draw them to scale on a separate piece of graph paper. Cut out the scaled furnishings from the paper. Take the furniture cutouts and play with them on the floor plan until the perfect room is achieved. Once the furnishings are best placed trace an outline of the furniture on the scaled copy of the floor plan and remove the paper furnishings. Write the sizes of the pieces of furniture in on the plan in order to know what is required before heading to the store.
Colour matching _ When using 3D floor planning you can see how colours work between rooms, from flooring to walls, to outdoor areas. Making it easier to see how elements work with each other throughout the home. 3D Rendering allows you to do the same, working with colours and fixtures and also furniture placement. Better estimation of costs and materials When using 3D floor planning or 3D render design you can better understand the cost of the project. It enables you to place fixtures, flooring, tiles and any other materials into the design, so that you can cost it up before construction begins. It also gives you the opportunity to make the right choice first time, meaning that you can save money in the long run and ensure you stay on budget!