By Leonie Scherer at August 06 2019 17:50:45
Blue prints of a real estate property can be transformed into 3D or interactive floor plans. Property owners who are willing to design their own engineering plans often look to use architectural design software for 3D or interactive floor plans. 3D architectural plans are illustrations/layout of a property. It is created from the basic blue prints of the building which is further edited to add electrical outlets, plumbing fixtures, windows, doors, furniture etc. This gives a complete overview of the home and the elimination of unused space. 3D home or office plans are a good way of understanding the space around the property and representing the correct measurement of doors and windows for proper ventilation. Precisely speaking, the 3D and interactive floor plans become the final step before the erection of the structure. However, it is difficult to create 3D and interactive plans for reconstruction of a property. Areas of the older plan need to be studied carefully and changed based on the requirements. Plans of existing structure are used and the preferred changes are done with no compromise in the structural reliability of the building. Engineering services also helps in making use of the space to add an extra room to the existing structure.
Draw a scaled plan using a pencil and graph paper. Now that the measurements have been taken it is time to get to work to create a scaled plan of the room. Drawing a room to scale on plan is simple once one understands that one quarter inch square on the graph paper equals one foot, and that inches can be estimated with half a square equaling 6_inches and a fourth of a square equating to 3_inches. Using the length and width measurements draw the basic room perimeter to scale onto the graph paper with a pencil. Draw in the doors, windows, etc. to scale on the graph paper in the same way you measured them in the room.