By Ursula Kuefer at July 09 2019 20:20:18
One of the best tips about using a basement for additional living space is to raise the ceiling. Adding an extra foot (or more) in the height of your basement ceiling is much less expensive than adding an additional floor or expanding the overall floor plan, and the added height will eliminate that closed_in feeling you get with so many basements.
We are going to assume here that you have already looked into your financing options and have a good idea of the amount of your budget you can apply towards the actual building cost of your new home. Begin with this amount and deduct 10% right off the top. You will thank me for this advice in the end. Everyone goes over budget during construction, even the financial nerds can't control every little detail that comes along. Take this net building budget and divide this dollar amount by the average square foot cost to build you got from the realtor or builder. Since I hope they gave you a low and high range this will give you two new numbers. These numbers are the low to high total square footage house floor plans sizes you should be searching for. If you choose to look at multi_level house floor plans then you will be comfortable on the upper level of this number since your cost per foot will be lower.
Technical difference _ In 2D floor plans, you, the designer, work on both y axis and x axis. Moreover, the design can be changed in up, down, right and left sides. On the other hand, 2D plans are a lot simpler and cheaper relatively. They can be used to show the right, top and front side of the object. Unlike 2D, designers work on three exis to create 3D floor plans. Actually, this is like molding an object that looks same no matter which angle you look at it from. With 3D technology, solid models and wireframes are created line by line.
During these same discussions ask questions like the cost difference to build a single level home as compared to a multi_level home. This is valuable information even if you are planning on a single level as your only option. The reason is that multi_level house floor plans costs are less per square foot and you may get more bang for your buck that way.