By Ursula Kuefer at July 12 2019 22:54:18
Take some time out to visit restaurants in your area, this is another simple way to look at samples of restaurant floor plans. Carry a notebook to take notes on the floor plan you are reviewing, go buy a cup of coffee, and analyze their floor plan and ask yourself again, what is good and bad about the floor plan and what would you change to maximize sales and minimize losses for their restaurant. In doing this you are getting ideas on what to do and not do to your own restaurant.
It is also a good idea to keep a list of things that you don't like; things you may have seen in a magazine or noted when visiting other log homes. Some of the most frequent complaints one hears about log homes, especially older models, is the lack of storage space and small closets or bathrooms. This is most often the result of poor planning or not taking into consideration the diameter of log walls and the lack of attics in most log homes. Refer to your list when discussing details with your designer and remember that in most cases you cannot build a closet or a bathroom that is too large.
During these same discussions ask questions like the cost difference to build a single level home as compared to a multi_level home. This is valuable information even if you are planning on a single level as your only option. The reason is that multi_level house floor plans costs are less per square foot and you may get more bang for your buck that way.
Technical difference _ In 2D floor plans, you, the designer, work on both y axis and x axis. Moreover, the design can be changed in up, down, right and left sides. On the other hand, 2D plans are a lot simpler and cheaper relatively. They can be used to show the right, top and front side of the object. Unlike 2D, designers work on three exis to create 3D floor plans. Actually, this is like molding an object that looks same no matter which angle you look at it from. With 3D technology, solid models and wireframes are created line by line.