By Michael Schmid at July 15 2019 06:52:46
Draw a scaled plan using a pencil and graph paper. Now that the measurements have been taken it is time to get to work to create a scaled plan of the room. Drawing a room to scale on plan is simple once one understands that one quarter inch square on the graph paper equals one foot, and that inches can be estimated with half a square equaling 6_inches and a fourth of a square equating to 3_inches. Using the length and width measurements draw the basic room perimeter to scale onto the graph paper with a pencil. Draw in the doors, windows, etc. to scale on the graph paper in the same way you measured them in the room.
Begin with measuring. Do a very rough drawing, on a piece of scrap paper for measuring purposes only, of your room showing walls and openings for doors, windows and fireplaces. Note where columns and built_in cabinetry are in the room as well. Take out the measuring tape and begin measuring a room writing down each measurement in the applicable space on your rough drawing. For a basic start, measure the length and width of your room.
House floor plans essentially fall into two categories _ custom_drawn and pre_drawn floor plans. It can take a lot of time, money and effort if one chooses the former. Moreover, a pre_drawn floor plan, apart from saving money and time, also lends itself to modifications as per one's needs.
Colonial floor plans are elegant without being ostentatious. Moreover, they have an element of history attached to them. These floor plans come from the early American settlements of the East Coast. Colonial architecture ranged from New England to Georgia and, therefore, there are regional variations in style.