By Florian Nadel at June 17 2019 14:35:19
By and large, almost any residential floor plan can be adapted to a log home, but there are substantial differences and considerations that need to be addressed. One such example is that of room dimensions as they relate to the diameter of the logs you will be utilizing. A custom handcrafted home made from 20" diameter logs will have a different footprint than one requiring 6" milled logs. If this is the first time you will be dealing with a log home manufacturer or architect, make sure you are comparing 'apples to apples' when discussing interior dimensions. If you want a room to be 14' wide, make certain that your designer knows that you want the interior of the room to have 14' of open clearance and not measured from the center of the corresponding logs. Using the example above, your 14' room could shrink to 12' if such presumptions are not understood.
Draw a scaled plan using a pencil and graph paper. Now that the measurements have been taken it is time to get to work to create a scaled plan of the room. Drawing a room to scale on plan is simple once one understands that one quarter inch square on the graph paper equals one foot, and that inches can be estimated with half a square equaling 6_inches and a fourth of a square equating to 3_inches. Using the length and width measurements draw the basic room perimeter to scale onto the graph paper with a pencil. Draw in the doors, windows, etc. to scale on the graph paper in the same way you measured them in the room.